Expert Answers about Jeep Storage

• Dimensions of Bestop Instatrunk for 2010 Jeep Wrangler Unlimited
• I checked with Bestop and the Instatrunk Custom Cargo Area Storage Unit # B4270201 measures 11 inches high x 11 inches deep x 35 inches wide when installed in your 2010 Jeep Wrangler Unlimited. This will give you 2.7 cubic feet of storage space which is lockable; I've added a link to the install instructions for you to take a look at as well.
  view full answer...


• Does Jeep Freedom Top Storage Bag Carry Both Panels?
• The Rampage Storage Bag for Jeep Freedom Top Panels # RA595001 fits both panels. It even has a liner in the middle to protect the panels from scratching while they are being stored. I've left a link to a video review for you to take a look at.
  view full answer...


• Top Rail Height on MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler
• The top tray on the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler # MR83MR measures 0.947" so you're looking at just under an inch tall, which I confirmed with my contact at MORryde. Hope this helps you out!
  view full answer...


• How Much does the StoreGate Tailgate Organizer for Jeep Wrangler Weigh?
• The StoreGate Tailgate Organizer for Jeep Wrangler JK, JKU, JL, and JLU MR58MR weighs about 6 pounds.
  view full answer...


• Top Tray Width on MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler Including Sides
• The widest part of the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler part # MR83MR that slides out is the top tray. The top tray measures 15-3/4" wide but that does not include the side walls. The side walls however are not very thick, around 1/16" so I would say the max width of the top tray is no more than 15-7/8" including the side walls so that is what you would need to account for in an opening.
  view full answer...


• Weight of DeeZee Specialty Series Storage Box for Use in Back of 2012 Jeep Wrangler Unlimited
• Your Jeep looks great! It looks like this box will fit perfectly. The overall weight of the DeeZee Storage Box # DZ6535P is 17 lb. and it is made from a sturdy poly-plastic. It's hard to tell from your photo what thickness of plywood you're using. Depending on the thickness of the plywood and the weight of the tools you'll be carrying, you may need to add some additional support. Plywood strengths vary based on thickness. The most popular thickness in home use is a 3/4" fir plywood....
  view full answer...


• What Hitch and Wiring Harness Will Fit a 2024 Jeep Wrangler Sport?
• I checked with our vendors and to add a hitch to your 2024 Jeep Wrangler Sport you will need the Curt item # C13392. This hitch has been confirmed to fit by Curt for the 2024 models so long as yours does not have a diesel engine. Since your Jeep does not have the tow package you will need the Curt T-Connector Vehicle Wiring Harness item # 56407. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located behind the tail lights. It will provide you with a 4-flat...
  view full answer...


• Hitch Receiver and Wiring Harness for a 2019 Jeep Wrangler
• Yes, I can confirm the etrailer Trailer Hitch Receiver item # e98856 and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118786 both fit your 2019 Jeep Wrangler. I have attached installation videos for both so you can follow along with the installation process. To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and...
  view full answer...


• What Are the Dimensions of the Demco Tow Bar Cover
• The Demco Tow Bar Storage Cover - Vinyl # DM9523042 is 28" long by 14" wide and would work just fine for your Demco Commander tow bar.
  view full answer...


• Which Hitch Mounts Behind the Bumper Cover of a 2024 Jeep Grand Cherokee?
• The hitch you are looking for is the Curt item # C96NR. This hitch is custom fit for the 2024 Jeep Grand Cherokees and installs with included hardware. I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like when installed. To add a 4-way wiring harness you will need the Curt T-Connector Vehicle Wiring Harness item # C27BR. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located behind the tail lights....
  view full answer...


• Curt Trailer Hitch 13084, Trailer Wiring, and Towing Accessories for a 2000 Jeep Cherokee
• I spoke with my contact at Curt and I have that measurement for you. From the face of the receiver to the center of the hitch pin hole it is 2-1/2 inches which is a common distance for hitches. I have included a link to a video showing a typical installation of Curt trailer hitch # 13084 on a 2000 Jeep Cherokee. If you are planning on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For trailer...
  view full answer...


• Recommended Hitch and Wiring Harness for a 2020 Jeep Wrangler
• I would be happy to make a couple for you! To add a hitch to your 2020 Jeep Wrangler, I recommend the Curt item # 13432. This hitch is custom fit and bolts to your Jeep super easy with four included bolts. It's got a 2" receiver with a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight so it will be great for towing or trailer or using accessories like a bike rack or cargo carrier. I have linked an installation video below to help you get this hitch set up. For a wiring harness,...
  view full answer...


• Curt Hitch Receiver for a 2021 Jeep Renegade w/Latitude Package and Clearance Height
• Yes, the Curt Trailer Hitch Receiver item # C13269 is a confirmed fit for your 2021 Jeep Renegade w/Latitude Package. You will have roughly 10-1/4" of ground clearance once installed. If you are in need of a wiring harness to control your trailer's lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118651. This plugs into an existing wiring harness in the rear of your Jeep. It requires no cutting or splicing of wires. To...
  view full answer...


• Recommended Hitch for a 2023 Jeep Wrangler Unlimited
• The best hitch for your 2023 Jeep Wrangler Unlimited is the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT78MR. This hitch is custom fit and bolts directly to your Jeep's bumper bar with included hardware. The reason I like this hitch is because it does not have a crossbar. The hitch attaches directly to your rear bumper and does not drastically affect your ground clearance like those with crossbars do. The item # DT78MR hitch has a 4,500 lbs towing capacity and a 675 lbs tongue...
  view full answer...


• How to Determine Clearance Required for Hitch Cargo Carrier on 2007 Jeep Wrangler
• It is easy to figure whether a hitch accessory like the etrailer Cargo Carrier # e98874 will fit well at the rear of a vehicle like your 2007 Jeep Wrangler that has a rear-mounted spare tire. All you need to do is take one simple measurement. Please refer to the linked article which shows how to measure from the hitch pin hole to the rear edge of the spare. This measurement tells you the clearance you need from the accessory carrier. The etrailer Cargo Carrier # e98874 will need just over...
  view full answer...


• Ground Clearance with Curt Trailer Hitch C13172 Installed on a 2014 Jeep Cherokee
• When we installed Curt trailer hitch # C13172 on a 2014 Jeep Cherokee the distance from the ground to the top of the receiver opening was 16 inches. So to the bottom of the receiver it would be approximately 13-1/2 inches. But if you have larger or smaller tires than what was on the vehicle on which we installed the hitch that figure can vary slightly. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900....
  view full answer...


• How Far is a Trailer Hitch Recessed Under the Bumper on a 2014 Jeep Patriot
• We haven't had a chance to install Draw-Tite trailer hitch # 75712 on a 2014 Jeep Patriot but the measurement should be around 6-1/2 inches like on the 2011 model in the video I have linked to the right. We have installed Curt hitch # C13081 on a 2014 Patriot and it measured 6-1/2 inches from the center of the hitch pin hole back to clear the rear bumper. I have linked the video for this hitch as well. If you plan on doing some towing you might be interested in etrailer ball mount kit...
  view full answer...


• Towing Capacity of 2017 Jeep Grand Cherokee Limited
• The towing capacity of your 2017 Jeep Grand Cherokee Limited is 3,500 lbs when you have a trailer hitch like the Curt # C13172 installed. For trailer wiring you'd then want the part # 118605 which installs without any splicing and has the most reliable converter box of all of the kits we offer. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
  view full answer...


• Recommended 7-Way Connector and Brake Controller for a 2015 Wrangler Unlimited w/ out Tow Package
• Since your 2015 Jeep Wrangler JKU doesn't have a vehicle connector you're going to need to install two separate wiring harnesses to add a 7-Way connector. The first one you will need is the T-One Vehicle Wiring Harness item # 118416. This custom-fit T-One connector plugs into your Jeep's wiring harness, behind the driver's-side tail light, to provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7....
  view full answer...


• Cargo Carrier Recommendation for Jeep Wrangler
• The Curt Cargo Carrier # C18113 is going to provide 6-1/2" of clearance from the center of the hitch pin hole to the front of the basket. A better choice, that will provide approximately 11" of clearance from the center of the hitch pin to the front of the basket is the Curt # C18150 and 10" from the rear bumper to the front edge of the basket (with a factory hitch). In addition to the added clearance, it's a bit larger to provide more space for storage. These measurements are taken using...
  view full answer...